Follow these easy steps to get your Zanussi ZT 25 Refrigerator up and running in no time.
Allow the appliance to stand for 2 hours after installation to let the refrigerant settle. This is crucial for optimal performance.
Remove all securing tapes. Wash the inside of the appliance with lukewarm water mixed with a little bicarbonate of soda (5 ml to 0.5 liter of water). Avoid using soap or detergent as these may leave an unpleasant smell.
Plug in the appliance and switch it on at the mains supply.
Turn the thermostat control to the required setting. A setting of 4 is usually suitable for normal operation. Leave the appliance for approximately 4 hours to reach the correct temperature before placing food inside.
Ensure the appliance is not installed close to heat sources such as cookers, dishwashers, or radiators. It should be located in a cool, well-ventilated room with unobstructed air openings.
The appliance must have adequate ventilation to ensure correct operation. The clearance space of 10 cm above the appliance may be reduced to 5 cm, providing a clearance space of 2.5 cm is left on either side.
Ensure there are no obstructions preventing the door from closing properly. This is essential to maintain the internal temperature and prevent energy waste.